Generate Power

Home Guides Generate Power
Solar panels generating power on a roof

Generating Natural Power

Harnessing natural energy sources all around us can be the most powerful way to supplement your energy needs with minimum ongoing expense.

Mainstream energy sources available today are solar, wind and thermal technology. While solar has become the most dominant we will see the rise to harness other natural sources as time goes by.

Capturing the sun that is readily available has become the norm and not taking advantage of such an affordable energy source is crazy.

Sun Capturing

Capturing the most energy from your roof or surrounding energy can be a complex task as the sun moves from overhead to low on the horizon over the course of a year, on top of that natural elements such as trees and other buildings can take a part in shading your system and dropping production lower when the sun does come out to play.

Using a trusted solar designer to walk you through the process and gather enough information is key. Most solar organizations use sales people with no training or experience to design your system, this means you are getting a system of convenience and not maximum production.

It's difficult to find a company that uses designers because most companies in the solar industry optimise for profit not benefit. They were nice to deal with so they built the best system for you right?

Understanding how to capture and use solar energy can be a bit off putting, quite simply installing a solar sytem can supplement roughly 30% of energy that is constantly being used throughout your home such as devices on standby, computers, NBN Wifi, fridges, freezers and electric cables etc just to name a few.

To capture twice the amount and get to 60% winter - 90% Summer (depending on you night time usage habits) energy usage from solar panels simply use appliances that can be turned on with a "delay on timer", this way your appliances can run on solar without the need to be home.

Without a battery storage device you simply need to turn devices that consume the most energy such as air conditioners, hotwater storage, clothes washer and dryers and dishwashers etc when your solar system is producting power from the sun.

Avoid calling around to find solar quotes and being provided with many free quotes that don't make sense. Rather find a trusted designer/installer that can break the information down and build a system that is specific to your needs. This usually isn't free as highly trained people cost money for their service, but the difference speaks for itself.

Important Considerations:
  • Use good quality trusted solar panels over the new shiny thing available.
  • Use tried and tested inverters to maximize savings
  • Use solar Designers to maximize the solar production with products on the market

People when shopping for a solar installer/retailer quite often forget it is meant to be a return on investment not a magical unicorn where numbers are pure fiction to sell you something. Lets be honest the numbers wont make sense without alot of explanation and knowing if you should purchase a system or not is really about person choice.

Questions to consider:
  • Are you going to live in the existing home for more than 10years?
  • Are looking at resale value over usefulness?
  • Is the appearance more important than the savings?
  • Do you want maximum return on investment for the future?

Basic Solar Knowledge

Sun Tracking
It best to be mindful when talking to a designer that the sun moves throughout the year and this can cause different productions and behaviours over time, your system will produce more in summer than it will in winter. However a good technician allows for winter and tries to maximise whats available to push production up.

Solar Panels
Solar panels only transfer roughly 25% of energy from the natural sun to electricity and will eventually erode by approximately 24% over 15 years, the exposed position in the sun and weather slowly wears them down.
On top of this the copper wires have a resistance from the solar panels to the inverter of a maximum of 3%.
To counter this a good solar designer will compensate for the losses by installing more solar panels than required, but still within the maximum allowable for the selected inverter.


Solar Inverters
Most solar retailers will tell you the inverter they are installing can have a battery, this could be a lie in the sense of how you as a customer means the question. Most solar inverters can be connected to the same switchboard as a battery inverter but they might not work together to keep power going if there is an outage.

Hybrid inverters do both solar and batteries together as one piece of equipment, so if your on a budget you might want a hybrid inverter so batteries can be attached at the time of installation or later. Doing it later is good in theory but in practice if you buy a battery more than 5 years after the hybrids installation it might not be compatible with what is on the market or simply old technology, my advice to you is install a battery within 2 years of the inverter.

If you already have solar and want a battery, do not touch the existing inverter as it was installed to a different standard than we have today and a completely rewire will be needed to make it comply but the solar panels wont be listed as by the network or the Clean Energy Council so it can't be reinstalled the only way is to replace it with a new compliant solution, so never touch the old system unless you want to replace it, to avoid compliance drama.

To understand the difference between a kilowatt and kilowatt hour simply think of it as a kiloWatt is the amount of appliances you can turn on at once and kiloWatt hours is how long the system will run under load.
For example; a 10kwh system might run 5kw load (washing machine and dryer) for two hours before becoming empty or it could run a fridge and freezer of 1kw for 10 hours. We will go over this more on the how to store power page.

Installing a battery inverter next to a solar system isn't so bad as quite often the solar sytem might be a 5kw inverter and the new battery inverter would usually be a 5kw. So in the middle of the day when the sun is strongest and the battery has a full charge the excess can be used to run your appliances that you left on with a timer, because you now have a total of 10kw of inverters to cover your usage you can have more loads on at once.

Solar is going through a natural change from just a solar system where you have to use the energy produced when the sun is available to using storage as becoming the new norm so you can use solar energy at your own convenience. So from 2025 onwards I suggest installing solar and batteries as a single unit. This reduces complexity of compatible devices etc. If you choose an ecosystem ( a single brand) all the equipment should be designed to work together on a data level, this means it should communicate across the system more effectively.

Solar Powered Pagola

With 1 in 3 rooftops with solar some people simply don't have enough roof space to install solar, so what do you do?

We are working on a new product to install Pagola's that have solar panels mounted ontop rather than tin or laserlite so we can build entertaining areas that generate power for the home.

We should have a product in mainstream before the end of 2025, call us to find out more, get ahead of the waiting list.

Looking to offer this at a similar price to a normal solar system with the inclusion of more entertaining space.

Flat Solar

We install flat glue on solar panels for customers who have a steep roof or the structure cannot support a normal solar array.

Installers

Why is it more important you select the right installer rather than the right retailer?

A good installer has rules that avoid trouble and dangers down the track after purchase. At Pro Tradie we have a simple rule, "no silicone under the array", this simply means we cannot seal broken tiles under the array with silicone that will wear out in 5 years and produce a leaky roof.

We find this important to us and our customers, we simply ask for more tiles and replace or repair damaged tiles under the array to avoid a leak from starting. This takes us more time to install but we prioritise quality over quantity, we offer more for our clients in the solar journey.

Ongoing support from your installer can be vital to your systems health and overall longevity, because that have intimate knowledge of the system design and how it came together, as every system can look similar a good installer will customize the solution to suit your specific needs.

They have the ability to wire a solar system to generate more energy through the winter periods and under shaded conditions, helping maximise production. This is critical as you will never know how good it could have been.